HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 456

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Rev. 2.00, 09/04, page 414 of 720
Bit
12
11
10
Bit Name
TST4
TST3
TST2
Initial
Value
0
0
0
R/W
R/W
R/W
R/W
Description
Auto Acknowledge Mode
Allows HCAN2 to generate its own acknowledge bit in
order to enable Self Test. In order to achieve the Self Test
mode, there are two type settings for this. One is to set
(TST0 = 1 & TST1 = 1 & TST2 = 1), so that the Tx value
can be internally provided to the Rx. The other way is to
set (TST0 = 0 & TST1 = 0 & TST2 = 0) and connect the
Tx and Rx onto the CAN bus so that the data can be
transmitted via the CAN bus.
0: HCAN2 does not generate its own acknowledge bit
1: HCAN2 generates its own acknowledge bit
Disable Error Counters
Enables/disables the error counters (TEC/REC) to be
functional. When this bit is enabled, the error counters
(TEC/REC) remain unchanged and holds the current
value. When this bit is disabled, the error counters
(TEC/REC) function according to the CAN specification.
0: Error counters (TEC/REC) function according to the
1: Error counters (TEC/REC) remain unchanged and
Disable Rx Input
Controls the Rx to be supplied into the CAN Interface
block. When this bit is enabled, the Rx pin value is
supplied into the CAN Interface block. When this bit is
disabled, the Rx value for the CAN block always remains
recessive or the Tx value internally connected if TST0 =
1.
0: External Rx pin is supplied for the CAN Interface block
1: [TST0 = 0] Rx always remain recessive for the CAN
Interface block
[TST0 = 1] Tx is internally supplied for the CAN
Interface block
CAN specification
holds the current value