EFM32G200F64 Energy Micro, EFM32G200F64 Datasheet - Page 96

• Manufacturer Part Number: EFM32G200F64
• Description: MCU 32BIT 64KB FLASH 32-QFN
• Manufacturer: Energy Micro
• Series: Geckor

Specifications of EFM32G200F64

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IrDA, SmartCard, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.8 V
• Data Converters: A/D 4x12b, D/A 1x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad
• Processor Series: EFM32G200
• Core: ARM Cortex-M3
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 2
• Operating Supply Voltage: 1.8 V to 3.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

4.3.2.1 About IT folding
4.3.3 CPUID Base Register
4.3.4 Interrupt Control and State Register
2011-02-04 - d0002_Rev1.00
In some situations, the processor can start executing the first instruction in an IT block while it is still
executing the IT instruction. This behavior is called IT folding, and improves performance, However, IT
folding can cause jitter in looping. If a task must avoid jitter, set the DISFOLD bit to 1 before executing
the task, to disable IT folding.
The CPUID register contains the processor part number, version, and implementation information. See
the register summary in Table 4.12 (p. 94) for its attributes. The bit assignments are:
Table 4.14. CPUID register bit assignments
The ICSR:
• provides:
• indicates:
31
Bits
[2]
[1]
[0]
Bits
[31:24]
[23:20]
[19:16]
[15:4]
[3:0]
• a set-pending bit for the Non-Maskable Interrupt (NMI) exception
• set-pending and clear-pending bits for the PendSV and SysTick exceptions
• the exception number of the exception being processed
• whether there are preempted active exceptions
• the exception number of the highest priority pending exception
• whether any interrupts are pending.
Im plem enter
Name
DISFOLD
DISDEFWBUF
DISMCYCINT
Name
Implementer
Variant
Constant
PartNo
Revision
24 23
Function
When set to 1, disables IT folding. see Section 4.3.2.1 (p. 96) for more information.
When set to 1, disables write buffer use during default memory map accesses. This causes
all bus faults to be precise bus faults but decreases performance because any store to
memory must complete before the processor can execute the next instruction.
Note
When set to 1, disables interruption of load multiple and store multiple instructions. This
increases the interrupt latency of the processor because any LDM or STM must complete
before the processor can stack the current state and enter the interrupt handler.
Function
Implementer code:
0x41 = ARM
Variant number, the r value in the rnpn product revision identifier:
0x2 = r2pX
Reads as 0xF
Part number of the processor:
0xC23 = Cortex-M3
Revision number, the p value in the rnpn product revision identifier:
0x0 = rXp0
0x1 = rXp1
Variant
This bit only affects write buffers implemented in the Cortex-M3 processor.
20 19
Constant
16 15
...the world's most energy friendly microcontrollers
96
PartNo
www.energymicro.com
4 3
Revision
0