EFM32G200F64 Energy Micro, EFM32G200F64 Datasheet - Page 80

• Manufacturer Part Number: EFM32G200F64
• Description: MCU 32BIT 64KB FLASH 32-QFN
• Manufacturer: Energy Micro
• Series: Geckor

Specifications of EFM32G200F64

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IrDA, SmartCard, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.8 V
• Data Converters: A/D 4x12b, D/A 1x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad
• Processor Series: EFM32G200
• Core: ARM Cortex-M3
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 2
• Operating Supply Voltage: 1.8 V to 3.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

3.10.1 BKPT
3.10.1.1 Syntax
3.10.1.2 Operation
3.10.1.3 Condition flags
3.10.1.4 Examples
3.10.2 CPS
3.10.2.1 Syntax
2011-02-04 - d0002_Rev1.00
Breakpoint.
BKPT #imm
where:
imm is an expression evaluating to an integer in the range 0-255 (8-bit value).
The BKPT instruction causes the processor to enter Debug state. Debug tools can use this to investigate
system state when the instruction at a particular address is reached.
imm is ignored by the processor. If required, a debugger can use it to store additional information about
the breakpoint.
The BKPT instruction can be placed inside an IT block, but it executes unconditionally, unaffected by
the condition specified by the IT instruction.
This instruction does not change the flags.
Change Processor State.
Mnemonic
MRS
MSR
NOP
SEV
SVC
WFE
WFI
BKPT 0xAB
Brief description
Move from special register to register
Move from register to special register
No Operation
Send Event
Supervisor Call
Wait For Event
Wait For Interrupt
; Breakpoint with immediate value set to 0xAB (debugger can
; extract the immediate value by locating it using the PC)
See
Section 3.10.6 (p.
83)
Section 3.10.7 (p.
83)
Section 3.10.8 (p.
84)
Section 3.10.9 (p.
85)
Section 3.10.10 (p.
85)
Section 3.10.11 (p.
86)
Section 3.10.12 (p.
86)
...the world's most energy friendly microcontrollers
80
www.energymicro.com