HD6413007F20 Renesas Electronics America, HD6413007F20 Datasheet - Page 92

• Manufacturer Part Number: HD6413007F20
• Description: IC H8 MCU ROMLESS 5V 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413007F20

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

3. MCU Operating Modes
Bits 6 to 4⎯Standby Timer Select 2 to 0 (STS2 to STS0): These bits select the length of time
the CPU and on-chip supporting modules wait for the internal clock oscillator to settle when
software standby mode is exited by an external interrupt.
When using a crystal oscillator, set these bits so that the waiting time will be at least 7 ms at the
system clock rate.
For further information about waiting time selection, see section 19.4.3, Selection of Waiting
Time for Exit from Software Standby Mode.
Bit 6
STS2
0
1
Bit 3⎯User Bit Enable (UE): Selects whether to use the UI bit in the condition code register as a
user bit or an interrupt mask bit.
Bit 3
UE
0
1
Bit 2⎯NMI Edge Select (NMIEG): Selects the valid edge of the NMI input.
Bit 2
NMIEG
0
1
Rev.5.00 Sep. 12, 2007 Page 62 of 764
REJ09B0396-0500
Bit 5
STS1
0
1
0
1
Description
UI bit in CCR is used as an interrupt mask bit
UI bit in CCR is used as a user bit
Description
An interrupt is requested at the falling edge of NMI
An interrupt is requested at the rising edge of NMI
Bit 4
STS0
0
1
0
1
0
1
0
1
Description
Waiting time = 8,192 states
Waiting time = 16,384 states
Waiting time = 32,768 states
Waiting time = 65,536 states
Waiting time = 131,072 states
Waiting time = 262,144 states
Waiting time = 1,024 states
Illegal setting
(Initial value)
(Initial value)
(Initial value)