HD6413007F20 Renesas Electronics America, HD6413007F20 Datasheet - Page 500

• Manufacturer Part Number: HD6413007F20
• Description: IC H8 MCU ROMLESS 5V 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413007F20

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

13. Serial Communication Interface
• Receiving Multiprocessor Serial Data: Figure 13.12 shows a sample flowchart for receiving
Rev.5.00 Sep. 12, 2007 Page 470 of 764
REJ09B0396-0500
multiprocessor serial data and indicates the procedure to follow.
Figure 13.12 Sample Flowchart for Receiving Multiprocessor Serial Data (1)
No
No
No
Read ORER and FER flags
Read ORER and FER flags
Read receive data from RDR
Set MPIE bit to 1 in SCR
Clear RE bit to 0 in SCR
Read RDRF flag in SSR
Read RDRF flag in SSR
Read RDRF flag in SSR
Finished receiving?
FER∨ORER = 1
FER∨ORER = 1
Start receiving
RDRF = 1
RDRF = 1
Own ID?
Initialize
in SSR
in SSR
<End>
Yes
Yes
Yes
Yes
No
No
Yes
No
Yes
Error handling
(1)
(2)
(3)
(continued on next page)
(5)
(4)
(1)
(2)
(3)
(4)
(5)
SCI initialization:
the receive data input function of the
RxD pin is selected automatically.
ID receive cycle:
set the MPIE bit to 1 in SCR.
SCI status check and ID check:
read SSR, check that the RDRF flag
is set to 1, then read data from RDR
and compare it with the processor's
own ID. If the ID does not match, set
the MPIE bit to 1 again and clear the
RDRF flag to 0. If the ID matches,
clear the RDRF flag to 0.
SCI status check and data receiving:
read SSR, check that the RDRF flag
is set to 1, then read data from RDR.
Receive error handling and break
detection:
if a receive error occurs, read the
ORER and FER flags in SSR to
identify the error. After executing the
necessary error handling, clear the
ORER and FER flags both to 0.
Receiving cannot resume while either
the ORER or FER flag remains set to
1. When a framing error occurs, the
RxD pin can be read to detect the
break state.