HD6413007F20 Renesas Electronics America, HD6413007F20 Datasheet - Page 543

• Manufacturer Part Number: HD6413007F20
• Description: IC H8 MCU ROMLESS 5V 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413007F20

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

15.1
The H8/3006 and H8/3007 include a 10-bit successive-approximations A/D converter with a
selection of up to eight analog input channels.
When the A/D converter is not used, it can be halted independently to conserve power. For details
see section 19.6, Module Standby Function.
The H8/3006 and H8/3007 support 70/134-state conversion as a high-speed conversion mode.
Note that it differs in this respect from the H8/3048 Group, which supports 134/266-state
conversion.
15.1.1
A/D converter features are listed below.
• 10-bit resolution
• Eight input channels
• Selectable analog conversion voltage range
• High-speed conversion
• Two conversion modes
• Four 16-bit data registers
• Sample-and-hold function
• Three conversion start sources
• A/D interrupt requested at end of conversion
• DMA controller (DMAC) activation
The analog voltage conversion range can be programmed by input of an analog reference
voltage at the V
Conversion time: maximum 3.5 μs per channel (with 20 MHz system clock)
Single mode: A/D conversion of one channel
Scan mode: continuous conversion on one to four channels
A/D conversion results are transferred for storage into data registers corresponding to the
channels.
The A/D converter can be activated by software, an external trigger, or an 8-bit timer compare
match.
At the end of A/D conversion, an A/D end interrupt (ADI) can be requested.
The DMAC can be activated at the end of A/D conversion.
Overview
Features
REF
pin.
Section 15 A/D Converter
Rev.5.00 Sep. 12, 2007 Page 513 of 764
15. A/D Converter
REJ09B0396-0500