HD6413007F20 Renesas Electronics America, HD6413007F20 Datasheet - Page 510

• Manufacturer Part Number: HD6413007F20
• Description: IC H8 MCU ROMLESS 5V 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413007F20

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

13. Serial Communication Interface
• Transmitting and Receiving Data Simultaneously (Synchronous Mode): Figure 13.20 shows a
Rev.5.00 Sep. 12, 2007 Page 480 of 764
REJ09B0396-0500
Note: When switching from transmitting or receiving to simultaneous transmitting and receiving, clear both the TE bit
sample flowchart for transmitting and receiving serial data simultaneously and indicates the
procedure to follow.
Figure 13.20 Sample Flowchart for Simultaneous Serial Transmitting and Receiving
No
No
No
Clear TE and RE bits to 0 in SCR
Read receive data from RDR, and
Start of transmitting and receiving
and the RE bit to 0, then set both bits to 1 simultaneously.
Write transmit data in TDR and
clear TDRE flag to 0 in SSR
clear RDRF flag to 0 in SSR
Read ORER flag in SSR
Read RDRF flag in SSR
Read TDRE flag in SSR
End of transmitting
and receiving?
ORER = 1
TDRE = 1
RDRF = 1
Initialize
<End>
Yes
No
Yes
Yes
Error handling
Yes
(4)
(5)
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(5)
SCI initialization: the transmit data output function of the
TxD pin and the read data input function of the RxD pin
are selected, enabling simultaneous transmitting and
receiving.
SCI status check and transmit data write: read SSR, check
that the TDRE flag is 1, then write transmit data in TDR
and clear the TDRE flag to 0.
can also be given by the TXI interrupt.
Receive error handling: if a receive error occurs, read the
ORER flag in SSR, then after executing the necessary
error handling, clear the ORER flag to 0.
ORER flag remains set to 1.
SCI status check and receive data read: read SSR, check
that the RDRF flag is 1, then read receive data from RDR
and clear the RDRF flag to 0. Notification that the RDRF
flag has changed from 0 to 1 can also be given by the RXI
interrupt.
To continue transmitting and receiving serial data: check
the RDRF flag, read RDR, and clear the RDRF flag to 0
before the MSB (bit 7) of the current frame is received.
Also check that the TDRE flag is set to 1, indicating that
data can be written, write data in TDR, then clear the
TDRE flag to 0 before the MSB (bit 7) of the current frame
is transmitted. When the DMAC is activated by a transmit-
data-empty interrupt request (TXI) to write data in TDR,
the TDRE flag is checked and cleared automatically.
When the DMAC is activated by a receive-data-full
interrupt request (RXI) to read RDR, the RDRF flag is
cleared automatically.
Notification that the TDRE flag has changed from 0 to 1
Neither transmitting nor receiving can resume while the