XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 50

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

9. Save and Print the
Programs
10. Run the Programs
1-6-2
Basic Operating Procedure
Converting Programs from Previous Models
1,2,3...
1. Select the bit for differential monitoring.
2. Select Differential Monitor from the PLC Menu. The Differential Monitor
3. Select Rising or Falling.
4. Click the Start Button.
Time Chart Monitoring
The CX-Programmer’s time chart monitor operation can be used to check and
debug program execution.
Data Tracing
The CX-Programmer’s data trace operation can be used to check and debug
program execution.
Online Editing
When a few lines of the program in a Module have to be modified, they can be
edited online with the FQM1 in MONITOR mode or PROGRAM mode from
the CX-Programmer. When more extensive modifications are needed, upload
the program from the Module to the CX-Programmer, make the necessary
changes, and transfer the edited program back to the Module.
To save a program, select File and then Save (or Save As) from the CX-Pro-
grammer menus.
To print a program, select File and then Print from the CX-Programmer
menus.
Switch the FQM1 to RUN mode to run the programs.
The layout of the Auxiliary Area and Cyclic Refresh Areas differ between the
FQM1-CM001, FQM1-MMP21, and FQM1-MMA21 and the FQM1-CM002,
FQM1-MMP22, and FQM1-MMA22. Programs can be converted to allow for
these difference, however, merely by changing the CPU type setting on the
CX-Programmer.
As an example, the procedure for converting a ladder program from the
FQM1-CM001 to the FQM1-CM002 is shown here along with the correspond-
ing CX-Programmer windows.
Dialog Box will be displayed.
Section 1-6
23