XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 426

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Peripheral Service Time Settings (CX-Programmer: Timer/Peripheral Tab Page)
Fixed Service Time Enable Setting (Set Time to All Events)
Peripheral Service Time
C-3 System Setup in Motion Control Modules
Settings Used by All Motion Control Modules
Startup Mode Settings (CX-Programmer: Startup Tab Page)
CX-Programmer: Module Settings Tab Page
System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations
+218
+218
+82
+304
Address
Address
Word
Word
Address
Address
15
00 to 07 00 to FF hex:
Bits
Bits
15
00
08
12
Bits
Bits
0: Default (6.25% of cycle
time)
1: Custom
Default: 0
0.0 to 25.5 ms
(unit: 0.1 ms)
Default: 00 hex
Read DM Data at Startup
Allow writing to user memory (user
memory protection)
Prohibit system interruption of the sync
mode
Detect cycle time over warming (detec-
tion of cycle times longer than 10 ms)
Settings
Settings
Function
Function
Sets the default service time or enables
setting of a custom service time.
Sets the time to allocate to peripheral
servicing. Bit 15 of +218 must be set to
1 to enable this setting.
0 hex: Disabled
1 hex: Enabled
The default setting for this Motion Control Mod-
ule startup mode disables Reading DM Data at
Startup. Set this bit to 1 to enable the Reading
of DM Data at Startup.
0 hex: Writing enabled
1 hex: Writing disabled
Note Set this bit to 1 to disable writing the fol-
0 hex: Allow interrupts
1 hex: Prohibit interrupts
Set this bit to 1 to prohibit system interrupts
during program execution and I/O memory
refreshing to maintain synced operation
between Modules in Sync Mode.
0 hex: Detect long cycles
1 hex: Do not detect long cycles
Note CIO 4005.09 will turn ON if this bit is set
Function
Function
lowing areas from the CX-Programmer:
user program and System Setup
to 0 and the cycle time exceeds 10 ms.
Remarks
Remarks
---
---
Related flags and
Related flags and
words
words
At power ON
When disabling: At
power ON or at start of
operation
When enabling: When
changed
At power ON
At start of operation
When setting is read
When setting is read
tion (cannot be
changed during
operation)
tion (cannot be
changed during
operation)
At start of opera-
At start of opera-
Appendix C
When setting is
When setting is
read
read
399