XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 464

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Auxiliary Area Allocations
A822
A823
A824
A825
A850
A851
A852
A853
A854 to
A855
A856 to
A857
Word
00 to 15 Adjustment Mode Monitor
00 to 15
00 to 15
00 to 15 Adjustment Mode Password
00 to 15 High-speed Counter 1 PV
00 to 15
00 to 15 High-speed Counter 2 PV
00 to 15
00 to 15 High-
00 to 15 High-
Bits
(Effective only when A825
is 5A5A hex.)
speed
Counter
1
speed
Counter
2
For following
counter modes
• Absolute lin-
• Absolute circu-
• Absolute lin-
For following
counter modes
• Linear counter
• Circular
For following
counter modes
• Absolute lin-
• Absolute circu-
• Absolute lin-
For following
counter modes
• Linear counter
• Circular
ear (CW )
lar
ear (CW+)
counter
ear (CW )
lar
ear (CW+)
counter
Name
Both Analog
Input and Ana-
log Outputs
Analog Inputs
PV of absolute
number of rota-
tions
Monitor data
PV of absolute
number of rota-
tions
Monitor data
Setting Offset Moni-
tor
Gain Value Monitor
Number of Average
Value Samples in
Adjustment Mode
5A5A hex: Adjustment mode enabled.
Other value: Adjustment mode disabled.
Range: 8000 0000 to 7FFF FFFF
Note For a Linear Counter, high-speed counter overflows/under-
flows are checked when the PV is read (i.e., when Module internal I/
O is refreshed).
Contains the number of rotations data (PV) read from the Encoder
when the SEN signal is input to the Servo Driver.
8000 0000 to 7FFF FFFF hex
• When monitoring counter movements (mode 1), contains the abso-
• When monitoring the counter frequency (mode 2), contains the fre-
Same as for A854 and A855 for high-speed counter 1 except that
measuring the high-speed counter frequency is not possible for high-
speed counter 2.
lute value of the amount of change in the PV of the high-speed
counter over the specified sampling time as a 8-digit hexadecimal
value (0000 0000 to FFFF FFFF hex).
quency of the high-speed counter calculated from the PV of the
high-speed counter between 0 and 7A120 hex (0 and 500 kHz).
The values in these
words can be over-
written directly, with-
out using the
Adjustment Value
Increment/Decre-
ment Bits.
Indicates the number of values to be aver-
aged to obtain the Offset/Gain Value Monitor
values in adjustment mode. The number of
samples can be set between 0000 and 0040
hex (0 to 64). Set this parameter before turn-
ing ON the Adjustment Enable Bit.
Function
• 10 to 10 V: FE0C
• 0 to 10 V, 0 to 5 V, 1
• 10 to 10 V: 1194 to
• 0 to 10 V, 0 to 5 V, 1
to 01F4 hex
to 5 V: FF38 to 00C8
hex
157C hex
to 5 V: 0ED8 to 1068
hex
Appendix D
437