XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 245

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Pulse Inputs
218
Target value
Target value 2 7500
Target value 1 2500
Interrupt tasks
3 10000
Counter PV
High-speed
Task 10
starts
The Reset Bit is kept ON in the program and the PV of the counter is reset
when the phase-Z signal is turned ON after the PV reaches its maximum
value. Before running the program, make the following settings in the System
Setup and restart the FQM1 to enable the new settings.
Example
When the PV reaches 2,500 hex, interrupt task 10 is started.
When the PV reaches 7,500 hex, interrupt task 11 is started.
When the PV reaches 10,000 hex, interrupt task 12 is started.
Counter 1:
Linear Counter, Counting speed = 50 kHz, Phase Z and software reset,
and Increment/decrement pulse input
Task 11
starts
Task 12
starts
PV reset on
phase-Z signal
Task 10
starts
Task 11
starts
Task 12
starts
PV reset on
phase-Z signal
Section 7-5
Time