XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 129

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Module Wiring
Wiring Procedure
102
1,2,3...
Note
Use the following procedure when wiring. Fujitsu-style connectors are used in
this example.
1. Check that each Unit is installed securely.
2. Do not remove the protective label from the top of the Unit until wiring has
3. When solder-type connectors are being used, be sure not to accidentally
Double-check to make sure that the Output Unit’s power supply leads haven’t
been reversed. If the leads are reversed, the Unit’s internal fuse will blow and
the Unit will not operate.
Note Do not force the cables.
been completed. This label prevents wire strands and other foreign matter
from entering the Unit during wiring. (Remove the label after wiring has
been completed to allow air circulation needed for cooling.)
short adjacent terminals. Cover the solder joint with heat-shrink tubing.
ID261
II
I
0 1 2 3 4 5
8 9
0 1 2 3 4 5
8 9
10 11
10 11
12 13 14 15
12 13 14 15
Before wiring
6 7
6 7
Heat-shrink tubing
Wire (0.2 to 0.13 mm
Solder-type connector
2
)
ID261
I
II
0 1 2 3 4 5 6
8 9
0 1 2 3 4 5 6 7
8 9
10 11
10 11
12 13 14 15
12 13 14 15
After wiring
7
Section 3-2
Remove label
after wiring