XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 207

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Serial Communications
6-1-4
Overview
180
Serial PLC Links
Note
Note
For details on the PT’s routing tables, refer to the CX-Designer Operation
Manual.
The FQM1 can be connected to a Serial PLC Link by the Complete Link
Method or Master Link Method.
With the Complete Link Method, both the CJ1M CPU and FQM1 can
exchange data (without programming) with all other nodes.
With the Master Link Method, data can be exchanged (without programming)
between the CJ1M CPU and FQM1 by connecting the CJ1M CPU Unit as the
master and the FQM1 as the slave
The FQM1 connection is made to the RS-232C port on the Coordinator Mod-
ule.
Words CIO 3100 to CIO 3189 in the Serial PLC Link Bit Area in the Coordina-
tor Module are shared with the CJ1M master as shown below.
CIO 3100 to CIO 3109: CJ1M master to FQM1 slave
CIO 3110 to CIO 3189: FQM1 slave to CJ1M master
Use a CJ1W-CIF11 RS-232C to RS-422A/485 Conversion Adapter when con-
necting more than one FQM1 to the same CJ1M CPU Unit (1:N, where N = 8
max.).
Up to 10 words can be sent by the CJM1 and FQM1. Fewer words can be
sent by setting the number of link words, but the number of words will be the
same for both the CJM1 and FQM1.
• Relay network table
01
Destination network
111
Relay network
01
Relay node
Section 6-1