TMP91xy25FG Toshiba, TMP91xy25FG Datasheet - Page 130

• Manufacturer Part Number: TMP91xy25FG
• Manufacturer: Toshiba

Specifications of TMP91xy25FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: Ramless
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: -
• (s)dram Controller: -
• Adc 10-bit Channel: 4
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: -
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 49
• Power Supply Voltage(v): 3.0 to 3.6

(2) Baud rate generator
(1) When BR0CR<BR0ADDE> = 0
(2) When BR0CR<BR0ADDE> = 1
clocks which determine the transfer rate of the serial channels.
the 6-bit prescaler which is shared by the timers. One of these input clocks is selected
using the BR0CR<BR0CK1:0> field in the baud rate generator control register.
by 1 or N + (16 − K)/16 to 16 values, determining the transfer rate.
BR0ADD<BR0K3:0>.
•
•
Note: If N = 1 or N = 16, the N + (16 − K)/16 division function is disabled. Set BR0CR
The baud rate generator is a circuit which generates transmission and receiving
The input clock to the baud rate generator, φT0, φT2, φT8 or φT32, is generated by
The baud rate generator includes a frequency divider, which divides the frequency
The transfer rate is determined by the settings of BR0CR<BR0ADDE, BR0S3:0> and
the selected prescaler clock by N, which is set in BR0CK<BR0S3:0>. (N = 1, 2, 3 ...
16)
the selected prescaler clock by N + (16 − K)/16 using the value of N set in BR0CR
<BR0S3:0> (N = 2, 3 ... 15) and the value of K set in BR0ADD<BR0K3:0> (K = 1, 2,
3 ... 15)
In UART mode
In I/O interface mode
BR0CR<BR0ADDE> to 0 before dividing by N.
used is explained below.
•
•
The settings BR0ADD<BR0K3:0> are ignored. The baud rate generator divides
The N + (16 − K)/16 division function is enabled. The baud rate generator divides
<BR0ADDE> to 0.
The N + (16 − K)/16 division function is not available in I/O interface mode. Set
The method for calculating the transfer rate when the baud rate generator is
In UART mode
In I/O interface mode
Baud rate =
Baud rate =
Frequency divider for baud rate generator
Frequency divider for baud rate generator
91C025-128
Input clock of baud rate generator
Input clock of baud rate generator
÷ 16
÷ 2
TMP91C025
2007-02-28