TMP91xy25FG Toshiba, TMP91xy25FG Datasheet - Page 124

• Manufacturer Part Number: TMP91xy25FG
• Manufacturer: Toshiba

Specifications of TMP91xy25FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: Ramless
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: -
• (s)dram Controller: -
• Adc 10-bit Channel: 4
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: -
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 49
• Power Supply Voltage(v): 3.0 to 3.6

jump.
ROM and
to BANK register of LOCAL2 area upper 3-bit address of jumping point.
actually jump to physical 2000000H to 3FFFFFH address. When return to common area, it
can only jump to E00000H to FFFFFFH without writing to BANK register of LOCAL2
area.
address conflict with is possible. When two kinds or more logical addresses to show
common area exist, management of BANK is confused. We recommends not using the
BANK setting, BANK address and common address conflict with.
time setting. It needs to write to BANK register of LOCAL1 area upper 3-bit address of
jumping point. After setting BANK4, jumping 400000H to 5FFFFFH address: logical local1
address, actually jump to physical 8000000H to 9FFFFFH address.
when moves from a bank to a bank. In other words, it must write to BANK register only in
common area and it is prohibit writing the BANK register in BANK area. If it modify the
BANK register’s data in BANK area, program runaway.
At bank operation S/W Example 3 of the above, Figure 3.8.7 shows example of program
In the same way with before example, two dot line squares show each
After setting BANK1, jumping C00000H to DFFFFFH address: logical local2 address,
By a way of setting of BANK register, the setting that BANK address and common
When it jumps to one memory from other different memory, it can set same as the last
It is a mark paid attention to here, it needs to go by way of common area by all means
CS
1
’s option ROM. Program start from E00000H common address, firstly, write
91C025-122
CS
TMP91C025
2
2007-02-28
’s program