PSB21473FV13XT Infineon Technologies, PSB21473FV13XT Datasheet - Page 549

• Manufacturer Part Number: PSB21473FV13XT
• Manufacturer: Infineon Technologies

Specifications of PSB21473FV13XT

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3.135V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 144
• Lead Free Status / RoHS Status: Compliant

22.10.1
The registers listed in table 22-5 and table 22-6, handle the interrupts which can be
triggered by the USB module. For general interrupt handling refer also to Chapter 8.2.1
on page 89.
The Base Address is 00’DD00
Note: In the description of the USB module registers, bits are marked as rw, r or w. Bits
Since the device supports multiple device configurations, interfaces and alternate
settings, a separate register CIAR is needed to inform the device which configuration,
interface and alternate setting is being selected. Any changes in the CIAR register
through Set_Configuration or Set_Interface will generate an interrupt in the
Data Sheet
marked as rw can be read and written. Bits marked as r can be read only. Writing
any value to r bits has no effect. Bits marked as w are used to execute internal
commands which are triggered by writing a 1. Writing a 0 to w bits has no effect.
Reading w bits returns a 0.
USB Register handling interrupts
H,
i.e the listed addresses are address offsets.
549
USB Module
PSB 21473
2003-03-31
INCA-D