PSB21473FV13XT Infineon Technologies, PSB21473FV13XT Datasheet - Page 330

• Manufacturer Part Number: PSB21473FV13XT
• Manufacturer: Infineon Technologies

Specifications of PSB21473FV13XT

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3.135V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 144
• Lead Free Status / RoHS Status: Compliant

Data Sheet
BAS
Indicates the state of the TIC-bus:
0: The INCA-D itself occupies the D- and C/I-channel
1: Another device occupies the D- and C/I-channel
Note: The CODR0 bits are updated every time a new C/I-code is detected in two
17.5.1.18 CIX0 - Command/Indication Transmit 0
Value after reset: FE
CIX0
CODX0
Code to be transmitted in the C/I-channel 0.
TBA2-0
Defines the individual address for the INCA-D on the IOM bus.
This address is used to access the C/I- and D-channel on the IOM interface.
Note: If only one device is liable to transmit in the C/I- and D-channels of the IOM it
BAC
Only valid if the TIC-bus feature is enabled (MODE:DIM2-0).
If this bit is set, the INCA-D will try to access the TIC-bus to occupy the C/I-channel even
if no D-channel frame has to be transmitted. It should be reset when the access has been
completed to grant a similar access to other devices transmitting in that IOM-channel.
Note: If the TIC-bus address (TBA2-0) is programmed to ’7’ and is not blocked by
consecutive IOM-frames. If several consecutive valid new codes are detected and
CIR0 is not read, only the first and the last C/I code is made available in CIR0 at
the first and second read of that register, respectively.
should always be given the address value ’7’.
another device the INCA-D writes its C/I0 code to IOM continuously.
7
... Bus Access Status
... C/I-Code 0 Transmit
... TIC Bus Address
... Bus Access Control
H
CODX0
IOM-2 Handler, TIC/CI Handler and HDLC Controller
330
TBA2 TBA1 TBA0
0
BAC
PSB 21473
2003-03-31
WR (2E
INCA-D
H
)