MC68EN360CAI25L Freescale Semiconductor, MC68EN360CAI25L Datasheet - Page 61

• Manufacturer Part Number: MC68EN360CAI25L
• Description: IC MPU QUICC 25MHZ 240-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MC68000r

Specifications of MC68EN360CAI25L

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 240-FQFP
• Core Size: 32 Bit
• Cpu Speed: 25MHz
• Embedded Interface Type: SCP, TDM
• Digital Ic Case Style: FQFP
• No. Of Pins: 240
• Supply Voltage Range: 4.75V To 5.25V
• Rohs Compliant: Yes
• Family Name: M68xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: FQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

2.1.14 Power Signals
The following signals are used for power and ground to the QUICC.
2.1.14.1 VCCSYN AND GNDSYN. These pins provide power and ground to the clock syn-
thesizer. They should be bypassed to each other with a 0.1- F capacitor. See the system
clock generation description in Section 6 System Integration Module (SIM60) for more
details.
2.1.14.2 VCCCLK AND GNDCLK. These pins provide power and ground to the clock out-
put pins (CLKO1 and CLKO2). They should be bypassed to each other with a 0.1- F capac-
itor. See the system clock generation description in Section 6 System Integration Module
(SIM60) for more detail.
2.1.14.3 GNDS1 AND GNDS2. These two pins are special ground pins that, if used prop-
erly, allow more aggressive timing to be provided on certain system bus pins. These pins
include AS, CASx, and IPIPE. Section 10 Electrical Characteristics already shows the
aggressive timing; the user does not need to modify any values in the section. GNDS1 and
GNDS2 should be connected to a quiet ground source or to a low-noise ground plane.
2.1.14.4 VCC AND GND. These pins are the rest of the power and ground connections for
the QUICC.
2.1.14.5 NC4–NC1. These four pins should not be connected on the QUICC package. They
are reserved for future enhancements.
CONFIG2/
FREEZE
0
0
0
0
1
1
1
1
Configuration Pins
CONFIG1/
All CONFIG pins do have an internal pull-up resistor during re-
set. If a configuration other than the default (CONFIG2-1 = 111)
is desired, these pins should be driven by an active open collec-
tor device during the assertion of RESETH.
BCLRO
0
0
1
1
0
0
1
1
Freescale Semiconductor, Inc.
CONFIG0/
For More Information On This Product,
RMC
0
1
0
1
0
1
0
1
Table 2-6. Initial Configuration
MC68360 USER’S MANUAL
Go to: www.freescale.com
Slave mode; global CS 8-bit size; MBAR at $003FF00.
Slave mode; global CS 32-bit size; MBAR at $003FF00; not MC68040 com-
panion mode; BR output, BG input.
Slave mode; global CS 16-bit size; MBAR at $003FF00.
MC68040 companion mode; global CS 32-bit size; MBAR at $003FF00; BR
input, BG output.
CPU enabled; global CS 32-bit size; MBAR at $003FF00.
CPU enabled; global CS 16-bit size; MBAR at $003FF00.
Slave mode; global CS disabled; MBAR at $003FF04.
CPU enabled; global CS 8-bit size; MBAR at $003FF00. (Default)
NOTE
Result
Signal Descriptions