D6417729RHF200BV Renesas Electronics America, D6417729RHF200BV Datasheet - Page 278

• Manufacturer Part Number: D6417729RHF200BV
• Description: IC SUPER H MPU ROMLESS 208QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of D6417729RHF200BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.85 V ~ 2.15 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit 7—Standby (STBY): Specifies transition to standby mode.
Bit 7: STBY
0
1
Bits 6, 5, and 3—Reserved: These bits are always read as 0. The write value should always be 0.
Bit 4—Standby Crystal (STBXTL): Specifies halting or operating of the clock pulse generator
in standby mode.
Bit 4: STBXTL
0
1
Bit 2—Module Standby 2 (MSTP2): Specifies halting of the clock supply to the timer unit TMU
(an on-chip peripheral module). When the MSTP2 bit is set to 1, the supply of the clock to the
TMU is halted.
Bit 2: MSTP2
0
1
Bit 1—Module Standby 1 (MSTP1): Specifies halting of the clock supply to the realtime clock
RTC (an on-chip peripheral module). When the MSTP1 bit is set to 1, the supply of the clock to
the RTC is halted. When the clock halts, all RTC registers become inaccessible, but the counter
keeps running.
Bit 1: MSTP1
0
1
Before switching the RTC to module standby, access at least one among the registers RTC, SCI,
and TMU.
Bit 0—Module Standby 0 (MSTP0): Specifies halting of the clock supply to the serial
communication interface SCI (an on-chip peripheral module). When the MSTP0 bit is set to 1, the
supply of the clock to the SCI is halted.
Rev. 5.0, 09/03, page 230 of 806
Description
Executing SLEEP instruction puts chip into sleep mode
value)
Executing SLEEP instruction puts chip into standby mode
Description
Clock pulse generator is halted in standby mode
Clock pulse generator is operates in standby mode
Description
TMU runs
Clock supply to TMU is halted
Description
RTC runs
Clock supply to RTC is halted
(Initial value)
(Initial value)
(Initial