MC68360VR25VL Freescale Semiconductor, MC68360VR25VL Datasheet - Page 725

• Manufacturer Part Number: MC68360VR25VL
• Description: IC MPU QUICC 25MHZ 357-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68360VR25VL

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Operating Supply Voltage (max): 3.3V
• Operating Supply Voltage (min): 2.7V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 357
• Package Type: BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

9.1.2.2 REGULAR EPROM. Figure 9-2 shows the glueless interface to standard EPROM in
the system. In this case, an 8-bit boot EPROM is used. All accesses to the EPROM, even
word or long-word length, will be partitioned into multiple byte accesses to the EPROM.
The fact that the CONFIG2–CONFIG0 pins are pulled high causes these pins to default to
the 111 condition, selecting the CPU32+ core to be enabled, the CS0 pin to select a byte
port size, and the MBAR to be located in its normal address location. This is the most com-
monly used configuration for the CONFIGx pins. The pullups are used to allow for some of
the alternate functions of the CONFIGx pins to be used in later applications.
During initialization, CS0 should be programmed to respond to a 128-Kbyte area in this
design.
9.1.2.3 FLASH EPROM. Figure 9-3 shows the glueless interface to a flash EPROM device.
It is identical to the regular EPROM except that it allows for write operations as well. This
design assumes that the write operations are CE controlled, rather than WE controlled. Most
flash EPROM manufacturers now support this alternative timing method.
The fact that the CONFIGx pins are pulled high causes these pins to default to the 111 con-
dition, selecting the CPU32+ core to be enabled, the CS0 pin to select a byte port size, and
the MBAR to be located in its normal address location. This allows a byte-sized EPROM to
be used without any external glue logic.
Figure 9-2. Glueless Interface to Standard EPROM
Freescale Semiconductor, Inc.
D31–D24
CS0
For More Information On This Product,
SYSTEM BUS AND
QUICC-GENERATED SIGNALS
A16–A0
MC68360 USER’S MANUAL
Go to: www.freescale.com
+5V
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
OE
CE (ENABLE)
P
PORT SIZE
128K 8
EPROM
27C010
BYTE
A10
A12
A13
A14
A15
A16
A11
A8
A0
A2
A3
A4
A5
A6
A7
A9
A1
Applications