MC68360VR25VL Freescale Semiconductor, MC68360VR25VL Datasheet - Page 403

• Manufacturer Part Number: MC68360VR25VL
• Description: IC MPU QUICC 25MHZ 357-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68360VR25VL

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Operating Supply Voltage (max): 3.3V
• Operating Supply Voltage (min): 2.7V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 357
• Package Type: BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

SMC2CS—SMC2 Clock Source (NMSI mode)
SMC1CS—SMC1 Clock Source (NMSI mode)
SDMx—SI Diagnostic Mode for TDM A or B
SMC2 can take its clocks from one of the baud rate generators or one of four pins from
the bank of clocks. The SMC2 transmit and receive clocks must be the same when it is
connected to the NMSI.
SMC1 can take its clocks from one of the baud rate generators or one of four pins from
the bank of clocks. The SMC1 transmit and receive clocks must be the same when it is
connected to the NMSI.
000 = SMC2 transmit and receive clocks are BRG1.
001 = SMC2 transmit and receive clocks are BRG2.
010 = SMC2 transmit and receive clocks are BRG3.
011 = SMC2 transmit and receive clocks are BRG4.
100 = SMC2 transmit and receive clocks are CLK5.
101 = SMC2 transmit and receive clocks are CLK6.
110 = SMC2 transmit and receive clocks are CLK7.
111 = SMC2 transmit and receive clocks are CLK8.
000 = SMC1 transmit and receive clocks are BRG1.
001 = SMC1 transmit and receive clocks are BRG2.
010 = SMC1 transmit and receive clocks are BRG3.
011 = SMC1 transmit and receive clocks are BRG4.
100 = SMC1 transmit and receive clocks are CLK1.
101 = SMC1 transmit and receive clocks are CLK2.
110 = SMC1 transmit and receive clocks are CLK3.
111 = SMC1 transmit and receive clocks are CLK4.
00 = Normal operation.
01 = Automatic Echo. In this mode, the channel_x transmitter automatically retransmits
10 = Internal Loopback. In this mode, the TDM transmitter output is internally connect-
11 = Loopback Control. In this mode, the TDM transmitter output is internally connect-
the TDM received data on a bit-by-bit basis. The receive section operates normal-
ly, but the transmit section can only retransmit received data. In this mode, the
L1GRx line is ignored.
ed to the TDM receiver input (L1TXDx is connected to L1RXDx). The receiver and
transmitter operate normally. The data appears on the L1TXDx pin. In this mode,
the L1RQx line is asserted normally. The L1GRx line is ignored.
ed to the TDM receiver input (L1TXDx is connected to L1RXDx). The transmitter
output (L1TXDx) and the L1RQx pin will be inactive. This mode is used to accom-
plish loopback testing of the entire TDM without affecting the external serial lines.
In modes 01,10, and 11, the receive and the transmit clocks
should be identical.
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68360 USER’S MANUAL
Go to: www.freescale.com
NOTE
Serial Interface with Time Slot Assigner