MC68360VR25VL Freescale Semiconductor, MC68360VR25VL Datasheet - Page 295

• Manufacturer Part Number: MC68360VR25VL
• Description: IC MPU QUICC 25MHZ 357-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68360VR25VL

• Processor Type: M683xx 32-Bit
• Speed: 25MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 25MHz
• Instruction Set Architecture: RISC
• Operating Supply Voltage (max): 3.3V
• Operating Supply Voltage (min): 2.7V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 357
• Package Type: BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

6.10.2 Memory Controller Overview
The block diagram of the QUICC memory controller is shown in Figure 6-10. The general-
purpose chip selects provide a glueless interface to EPROM, SRAM, flash EPROM
(FEPROM), and other peripherals. The general-purpose chip selects are available on lines
CS0–CS7. CS0 also functions as the global (boot) chip select for accessing the boot
EPROM. The chip selects allow 0 to 15 wait states.
The flexible memory controller allows a glueless DRAM interface to single in-line memory
modules (SIMMs) as well as a grid array of DRAMs on a board. The DRAM controller con-
trols the address multiplexing, access mode, refresh operation, and the timing generation
• General-Purpose Chip Selects (SRAM Banks)
• DRAM Controller (DRAM Banks)
• DRAM Controller Also Contains a Refresh Unit with:
• DRAM Controller Also Supports External Masters
—May Be Used with SRAM, EPROM, FEPROM, and Peripherals
—Global (Boot) Chip Select Available at System Reset
—Two-Clock Accesses to External SRAM
—Programmable Port Size of 8, 16, and 32 Bits for Each Chip Select
—Supports up to Eight Banks of DRAM of Size 128K
—Supports a DRAM Port Size of 16 or 32 Bits
—Internal Address Multiplexing for 16- and 32-Bit DRAM Systems Available for all On-
—Glueless Interface to One Bank of DRAM SIMMs (Only External Buffers Are Re-
—Four CAS Lines
—Two of the Eight RAS Lines May Be Output on Two Pins Each for Double-Drive Ca-
—Page Mode with Page Switch Detection Logic
—Page Mode Supports 128K, 256K, 512K, 1M, 2M, 4M, 8M, and 16M Page Banks
—Supports Page Mode Normal, Page Hit, and Page Miss
—Burst Support for the MC68040 Accesses to DRAM
—CAS Before RAS Refresh Support
—A Programmable Refresh Timer
—Refresh Active During External Reset
—Disable Refresh Mode
—Stacking of up to Seven Refresh Cycles
—Supports MC68EC040 with 3,2,2,2 Line Fill (60-ns DRAMs)
—Supports DRAM for External QUICC or MC68030-Type Accesses (Page Support
—Supports DRAM Control for System Bus Containing External MC68EC040 and Mul-
—Synchronous and Asynchronous External Masters Possible
—Special Options for External Master to Improve DRAM Performance
1M
Chip Bus Masters
quired for Additional SIMM Banks)
pability
Available in this Mode)
tiple QUICCs
X, 2M
X, 4M
Freescale Semiconductor, Inc.
For More Information On This Product,
X, 8M
MC68360 USER’S MANUAL
Go to: www.freescale.com
X or 16M
X
System Integration Module (SIM60)
X, 256K
X, 512K
X,