HD64F7047FW40V Renesas Electronics America, HD64F7047FW40V Datasheet - Page 586

• Manufacturer Part Number: HD64F7047FW40V
• Description: MCU 5V 256K I-TEMP,PB-FREE 100-Q
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047FW40V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

18.4.1
Port E has the following registers. For details on register addresses and register states during each
processing, refer to appendix A, Internal I/O Register.
• Port E data register H (PEDRH)
• Port E data register L (PEDRL)
18.4.2
The port E data registers H and L (PEDRH and PEDRL) are 16-bit readable/writable registers that
store port E data. Bits PE21DR to PE0DR correspond to pins PE21 to PE0 (multiplexed functions
omitted here).
When a pin functions is a general output, if a value is written to PEDRH or PEDRL, that value is
output directly from the pin, and if PEDRH or PEDRL is read, the register value is returned
directly regardless of the pin state.
When a pin functions is a general input, if PEDRH or PEDRL is read, the pin state, not the register
value, is returned directly. If a value is written to PEDRH or PEDRL, although that value is
written into PEDRH or PEDRL it does not affect the pin state. Table 18.4 summarizes port E data
register read/write operations.
PEDRH:
Rev. 2.00, 09/04, page 544 of 720
Bit
15 to 6 —
5
4
3
2
1
0
Bit Name
PE21DR
PE20DR
PE19DR
PE18DR
PE17DR
PE16DR
Register Descriptions
Port E Data Registers H and L (PEDRH and PEDRL)
Initial Value R/W
All 0
0
0
0
0
0
0
R
R/W
R/W
R/W
R/W
R/W
R/W
Description
Reserved
These bits are always read as 0, and should only be
written with 0.
See table 18.4.