HD64F7047FW40V Renesas Electronics America, HD64F7047FW40V Datasheet - Page 433

• Manufacturer Part Number: HD64F7047FW40V
• Description: MCU 5V 256K I-TEMP,PB-FREE 100-Q
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047FW40V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

13.5
The A/D converter generates an A/D conversion end interrupt (ADI) upon the completion of A/D
conversion. ADI interrupt requests are enabled when the ADIE bit is set to 1 while the ADF bit in
ADCSR is set to 1 after A/D conversion is completed. The data transfer controller (DTC) can be
activated by an ADI interrupt. Having the converted data read by the DTC in response to an ADI
interrupt enables continuous conversion to be achieved without imposing a load on software.
The A/D converter can generate an A/D conversion end interrupt request. The ADI interrupt can
be enabled by setting the ADIE bit in the A/D control/status register (ADCSR) to 1, or disabled by
clearing the ADIE bit to 0. The DTC can be activated by an ADI interrupt. In this case an interrupt
request is not sent to the CPU.
When the DTC is activated by an ADI interrupt, the ADF bit in ADCSR is automatically cleared
when data is transferred by the DTC.
Table 13.5 A/D Converter Interrupt Source
Name
ADI
Interrupt Sources and DTC Transfer Requests
Interrupt Source
A/D conversion completed
ADF
Interrupt Source Flag
Rev. 2.00, 09/04, page 391 of 720
DTC Activation
Possible