HD64F7047FW40V Renesas Electronics America, HD64F7047FW40V Datasheet - Page 567

• Manufacturer Part Number: HD64F7047FW40V
• Description: MCU 5V 256K I-TEMP,PB-FREE 100-Q
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047FW40V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

17.1
The registers listed below make up the pin function controller (PFC). For details on the addresses
of the registers and their states during each process, see appendix A, Internal I/O Register.
• Port A I/O register L (PAIORL)
• Port A control register L3 (PACRL3)
• Port A control register L2 (PACRL2)
• Port A control register L1 (PACRL1)
• Port B I/O register (PBIOR)
• Port B control register 1 (PBCR1)
• Port B control register 2 (PBCR2)
• Port D I/O register L (PDIORL)
• Port D control register L1 (PDCRL1)
• Port D control register L2 (PDCRL2)
• Port E I/O register H (PEIORH)
• Port E I/O register L (PEIORL)
• Port E control register H (PECRH)
• Port E control register L1 (PECRL1)
• Port E control register L2 (PECRL2)
17.1.1
The port A I/O register L (PAIORL) is a 16-bit readable/writable register that is used to set the
pins on port A as inputs or outputs. Bits PA15IOR to PA0IOR correspond to pins PA15 to PA0
(names of multiplexed pins are here given as port names and pin numbers alone). PAIORL is
enabled when the port A pins are functioning as general-purpose inputs/outputs (PA15 to PA0),
SCK2 and SCK3 pins are functioning as inputs/outputs of SCI, and PCIO pins are functioning as
an input/output of MMT. In other states, PAIORL is disabled.
A given pin on port A will be an output pin if the corresponding bit in PAIORL is set to 1, and an
input pin if the bit is cleared to 0.
The initial value of PAIORL is H'0000.
17.1.2
The port A control registers L3 to L1 (PACRL3 to PACRL1) are 16-bit readable/writable registers
that are used to select the functions of the multiplexed pins on port A.
Register Descriptions
Port A I/O Register L (PAIORL)
Port A Control Registers L3 to L1 (PACRL3 to PACRL1)
Rev. 2.00, 09/04, page 525 of 720