ATSAM3U4CA-CU Atmel, ATSAM3U4CA-CU Datasheet - Page 875

• Manufacturer Part Number: ATSAM3U4CA-CU
• Description: IC MCU 32BIT 256KB FLSH 100TFBGA
• Manufacturer: Atmel
• Series: SAM3Ur

Specifications of ATSAM3U4CA-CU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 96MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 57
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 52K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b, 4x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 52 KB
• Interface Type: 3xUSART, TWI, 4xSPI, Bus
• Maximum Clock Frequency: 96 MHz
• Number Of Programmable I/os: 57
• Number Of Timers: 8
• Operating Supply Voltage: 1.62 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3U-EK
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6430D–ATARM–25-Mar-11
6430D–ATARM–25-Mar-11
When the fault protection is triggered on a channel, the fault protection mechanism forces the
channel outputs to the values defined by the fields FPVHx and FPVLx in the
tion Value Register”
forcing is made asynchronously to the channel counter.
CAUTION:
If a comparison unit is enabled (see
triggered in the channel 0, in this case the comparison cannot match.
As soon as the fault protection is triggered on a channel, an interrupt (different from the interrupt
generated at the end of the PWM period) can be generated but only if it is enabled and not
masked. The interrupt is reset by reading the interrupt status register, even if the fault which has
caused the trigger of the fault protection is kept active.
• To prevent an unexpected activation of the status flag FSy in the PWM_FSR register, the
• To prevent an unexpected activation of the Fault Protection on the channel x, the bit FPEx[y]
FMODy bit can be set to “1” only if the FPOLy bit has been previously configured to its final
value.
can be set to “1” only if the FPOLy bit has been previously configured to its final value.
(PWM_FPV) and leads to a reset of the counter of this channel. The output
Section 38.6.3 ”PWM Comparison
SAM3U Series
SAM3U Series
Units”) and if a fault is
“PWM Fault Protec-
875
875