ATSAM3U4CA-CU Atmel, ATSAM3U4CA-CU Datasheet - Page 373

• Manufacturer Part Number: ATSAM3U4CA-CU
• Description: IC MCU 32BIT 256KB FLSH 100TFBGA
• Manufacturer: Atmel
• Series: SAM3Ur

Specifications of ATSAM3U4CA-CU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 96MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 57
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 52K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b, 4x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 52 KB
• Interface Type: 3xUSART, TWI, 4xSPI, Bus
• Maximum Clock Frequency: 96 MHz
• Number Of Programmable I/os: 57
• Number Of Timers: 8
• Operating Supply Voltage: 1.62 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3U-EK
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 25-19. TDF Optimization: No TDF wait states are inserted if the TDF period is over when the next access begins
25.13.3
6430D–ATARM–25-Mar-11
6430D–ATARM–25-Mar-11
D[15:0]
A [23:2]
NCS0
NWE
MCK
NRD
TDF Optimization Disabled (TDF_MODE = 0)
read access on NCS0 (NRD controlled)
When optimization is disabled, tdf wait states are inserted at the end of the read transfer, so that
the data float period ends when the second access begins. If the hold period of the read1 con-
trolling signal overlaps the data float period, no additional tdf wait states will be inserted.
Figure
with no TDF optimization.
• read access followed by a read access on another chip select,
• read access followed by a write access on another chip select,
• read access followed by a write access on the same chip select,
25-20,
Figure 25-21
NRD_HOLD= 4
TDF_CYCLES = 6
and
Figure 25-22
Read to Write
Wait State
NWE_SETUP= 3
illustrate the cases:
write access on NCS0 (NWE controlled)
SAM3U Series
SAM3U Series
373
373