ATSAM3U4CA-CU Atmel, ATSAM3U4CA-CU Datasheet - Page 405

• Manufacturer Part Number: ATSAM3U4CA-CU
• Description: IC MCU 32BIT 256KB FLSH 100TFBGA
• Manufacturer: Atmel
• Series: SAM3Ur

Specifications of ATSAM3U4CA-CU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 96MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 57
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 52K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b, 4x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 52 KB
• Interface Type: 3xUSART, TWI, 4xSPI, Bus
• Maximum Clock Frequency: 96 MHz
• Number Of Programmable I/os: 57
• Number Of Timers: 8
• Operating Supply Voltage: 1.62 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3U-EK
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

25.18.3
Name:
Address:
Access:
Reset:
• SMCSTS: NAND Flash Controller status (this field cannot be reset)
0: NAND Flash Controller is disabled.
1: NAND Flash Controller is enabled.
• RB_RISE: Selected Ready Busy Rising Edge Detected
When set to one, this flag indicates that a rising edge on Ready/Busy Line has been detected. This flag is reset after a sta-
tus read operation. The Ready/Busy line selected is the decoding of the set NFCCSID, RBNSEL fields.
• RB_FALL: Selected Ready Busy Falling Edge Detected
When set to one, this flag indicates that a falling edge on Ready/Busy Line has been detected. This flag is reset after a sta-
tus read operation. The Ready/Busy line is selected through the decoding of the set NFCSID, RBNSEL fields.
• NFCBUSY: NFC Busy (this field cannot be reset)
When set to one this flag indicates that the Controller is activated and accesses the memory device.
• NFCWR: NFC Write/Read Operation (this field cannot be reset)
When a command is issued, this field indicates the current Read or Write Operation. This field can be manually updated
with the use of the SMC_CTRL register.
• NFCSID: NFC Chip Select ID (this field cannot be reset)
When a command is issued, this field indicates the value of the targeted chip select. This field can be manually updated
with the use of the SMC_CTRL register.
• XFRDONE: NFC Data Transfer Terminated
When set to one, this flag indicates that the NFC has terminated the Data Transfer. This flag is reset after a status read
operation.
• CMDDONE: Command Done
When set to one, this flag indicates that the NFC has terminated the Command. This flag is reset after a status read
operation.
6430D–ATARM–25-Mar-11
6430D–ATARM–25-Mar-11
NFCASE
31
23
15
–
–
7
–
SMC NFC Status Register
0x400E0008
SMC_SR
Read-only
0x00000000
AWB
30
22
14
–
6
–
RB_FALL
NFCSID
UNDEF
29
21
13
–
5
RB_RISE
DTOE
28
20
12
–
4
NFCWR
27
19
11
–
–
3
–
26
18
10
–
–
–
2
–
CMDDONE
SAM3U Series
SAM3U Series
25
17
–
9
–
1
–
RB_EDGE0
XFRDONE
NFCBUSY
SMCSTS
24
16
8
0
405
405