DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 69

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

2.8
2.8.1
The address space of this LSI includes empty areas in addition to the ROM, RAM, and on-chip
I/O registers areas available to the user. When data is transferred from CPU to empty areas, the
transferred data will be lost. This action may also cause the CPU to malfunction. When data is
transferred from an empty area to CPU, the contents of the data cannot be guaranteed.
2.8.2
EEPMOV is a block-transfer instruction and transfers the byte size of data indicated by R4 or
R4L, which starts from the address indicated by R5, to the address indicated by R6. Set R4, R4L,
and R6 so that the end address of the destination address (value of R6 + R4L or R6 + R4) does not
exceed H'FFFF (the value of R6 must not change from H'FFFF to H'0000 during execution).
Notes on Data Access to Empty Areas
EEPMOV Instruction
Usage Notes
Program halt state
Reset
occurs
Reset state
Figure 2.12 State Transitions
Reset
occurs
SLEEP instruction executed
Reset cleared
Reset occurs
Interrupt
source
Exception-handling state
Program execution state
Rev. 3.00 May 15, 2007 Page 35 of 516
Interrupt
source
Exception-
handling
complete
REJ09B0152-0300
Section 2 CPU