DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 541

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

Item
Figure 14.4 Sample SCI3
Initialization Flowchart
Figure 14.6 Sample Serial
Transmission Flowchart
(Asynchronous Mode)
14.5 Operation in Clock
Synchronous Mode
14.6 Multiprocessor
Communication Function
Page Revisions (See Manual for Details)
258
260
264
270
… After 8-bit data is output, the transmission line holds
the MSB state. In clock synchronous mode, no parity or
Modified
Modified
Deleted
multiprocessor bit is added.
This section is deleted.
[3]
SCR to 1, and set RIE, TIE
Set SPC3 bit in SPCR to 1
Clear PDR to 0 and set PCR to 1
<Initialization completion>
1-bit interval elapsed?
Clear SPC3 bit in SPCR and
Set TE and RE bits in
and TEIE bits.
TE bit in SCR to 0*
Break output?
<End>
Yes
Yes
Wait
Rev. 3.00 May 15, 2007 Page 507 of 516
No
No
[4]
[3]
Note: * When the SPC3 bit in SPCR is cleared to 0,
[[4] Wait at least one bit interval, then set the
To output a break in serial transmission,
after setting PCR to 1 and PDR to 0,
clear the SPC3 bit in SPCR and the TE
bit in SCR to 0.
TE bit or RE bit in SCR to 1. Setting bits
TE and RE enables the TXD3 and RXD3
pins to be used. Also set the RIE, TIE,
and TEIE bits, depending on whether
interrupts are required. In asynchronous
mode, the bits are marked at
transmission and idled at reception to
wait for the start bit.
the pin functions as an I/O port.
REJ09B0152-0300