DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 270

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

Section 14 Serial Communication Interface 3 (SCI3, IrDA)
Rev. 3.00 May 15, 2007 Page 236 of 516
REJ09B0152-0300
Bit
4
3
2
Bit Name
PM
STOP
MP
Initial
Value
0
0
0
R/W
R/W
R/W
R/W
Description
Parity Mode (enabled only when the PE bit is 1 in
asynchronous mode)
0: Selects even parity.
1: Selects odd parity.
When even parity is selected, a parity bit is added in
transmission so that the total number of 1 bits in the
transmit data plus the parity bit is an even number, in
reception, a check is carried out to confirm that the
number of 1 bits in the receive data plus the parity bit is
an even number.
When odd parity is selected, a parity bit is added in
transmission so that the total number of 1 bits in the
transmit data plus the parity bit is an odd number, in
reception, a check is carried out to confirm that the
number of 1bits in the receive data plus the parity bit is
an odd number.
If parity bit addition and checking is disabled in clock
synchronous mode and asynchronous mode, the PM bit
setting is invalid.
Stop Bit Length (enabled only in asynchronous mode)
Selects the stop bit length in transmission.
0: 1 stop bit
1: 2 stop bits
For reception, only the first stop bit is checked,
regardless of the value in the bit. If the second stop bit
is 0, it is treated as the start bit of the next transmit
character.
5-Bit Communication
When this bit is set to 1, the 5-bit communication format
is enabled. Make sure to set bit 5 (PF) to 1 when setting
this bit (MP) to 1.