DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 187

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

The timer W has a 16-bit timer having output compare and input capture functions. The timer W
can count external events and output pulses with an arbitrary duty cycle by compare match
between the timer counter and four general registers. Thus, it can be applied to various systems.
10.1
• Selection of eight counter clock sources: seven internal clocks (φ, φ/2, φ/4, φ/8, φ
• Capability to process up to four pulse outputs or four pulse inputs
• Four general registers:
• Four selectable operating modes:
• Any initial timer output value can be set
• Five interrupt sources
• Use of module standby mode enables this module to be placed in standby mode independently
Table 10.1 summarizes the timer W functions, and figure 10.1 shows a block diagram of the timer
W.
TIM08W0A_000020020200
φ
 Independently assignable output compare or input capture functions
 Usable as two pairs of registers; one register of each pair operates as a buffer for the output
 Waveform output by compare match
 Input capture function
 Counter clearing function
 PWM mode
Four compare match/input capture interrupts and an overflow interrupt.
when not used. (The timer W is halted as the initial value. For details, refer to section 5.4,
Module Standby Function.)
W
/16) and an external clock (external events can be counted)
compare or input capture register
Selection of 0 output, 1 output, or toggle output
Rising edge, falling edge, or both edges
Counters can be cleared by compare match
Up to three-phase PWM output can be provided with desired duty ratio.
Features
Section 10 Timer W
Rev. 3.00 May 15, 2007 Page 153 of 516
Section 10 Timer W
REJ09B0152-0300
W
, φ
W
/4, and