DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 335

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

[1]
[2]
[3]
[4]
[5]
[6]
[7]
No
No
Dummy read on SSRDR
Figure 15.8 Sample Serial Reception Flowchart (MSS = 1)
RE = 0, RSSTP = 0
Read receive data
Read receive data
Set RSSTP to 1
Last reception?
Read ORER
Read ORER
Read RDRF
Read RDRF
Initialization
ORER = 1?
ORER = 1?
RDRF = 1?
RDRF = 1?
in SSRDR
in SSRDR
Start
End
No
No
Yes
No
Yes
Yes
Yes
Yes
Overrun error
Section 15 Synchronous Serial Communication Unit (SSU)
processing
[1] After setting each register in the SSU,
[2] Determine whether the last one byte of
[3][6] When a receive error occurs, clear the
[4] Confirm that the RDRF bit is 1. If the RDRF
[5] Before the last one byte of data is received,
[7] Confirm that the RDRF bit is 1. To end
dummy read on SSRDR is performed
and reception is started.
data is received. When the last one byte
of data is received, set to stop reception
after the data is received.
bit is 1, receive data in SSRDR is read. If the
SSRDR bit is read, the RDRF bit is automatically
cleared.
set the RSSTP bit to 1 and reception is stopped
after the data is received.
reception, clear the RE and RSSTP bits to
0 and then read the last receive data. If the
SSRDR bit is read before clearing the RE bit,
reception is started again.
ORER flag to 0 after the ORER flag in
SSSR is read and an appropriate error
processing is performed. When the ORER
flag is set to 1, transmission/reception
cannot be started again.
Rev. 3.00 May 15, 2007 Page 301 of 518
REJ09B0152-0300