DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 331

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

15.4.5
Initialization in Clocked Synchronous Communication Mode: Figure 15.4 shows the
initialization in clocked synchronous communication mode. Before transmitting and receiving
data, the TE and RE bits in SSER should be cleared to 0, then the SSU should be initialized.
Note: When the operating mode, or transfer format, is changed for example, the TE and RE bits
must be cleared to 0 before making the change using the following procedure. When the
TE bit is cleared to 0, the TDRE flag is set to 1. Note that clearing the RE bit to 0 does not
change the contents of the RDRF and ORER flags, or the contents of SSRDR.
Operation in Clocked Synchronous Communication Mode
Figure 15.4 Initialization in Clocked Synchronous Communication Mode
Clear CPOS and CPHS bits to 0 and set
MLS and CKS2 to CKS0 bits in SSMR
Set the TE and RE bits in SSER to 1
reception/transmission and reception
and set RIE, TIE, TEIE, and RSSTP
Clear TE and RE bits in SSER to 0
Clear SSUMS bit in SSCRL to 0
bits according to transmission/
Set SCKS bit in SSCRH to 1
Clear ORER bit in SSSR to 0
and set MSS and SOOS bits
Section 15 Synchronous Serial Communication Unit (SSU)
Start
End
Rev. 3.00 May 15, 2007 Page 297 of 518
REJ09B0152-0300