DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 231

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

11.4.3
When the seconds, minutes, hours, or day-of-week datum is updated while time data is being read,
the data obtained may not be correct, and so the time data must be read again. Figure 11.4 shows
an example in which correct data is not obtained. In this example, since only RSECDR is read
after data update, about 1-minute inconsistency occurs.
To avoid reading in this timing, the following processing must be performed.
1. Check the setting of the BSY bit, and when the BSY bit changes from 1 to 0, read from the
2. When INT in RTCCR1 is cleared to 0 and an interrupt is used, read from the second, minute,
3. Read from the second, minute, hour, and day-of-week registers twice in a row, and if there is
second, minute, hour, and day-of-week registers. When about 62.5 ms is passed after the BSY
bit is set to 1, the registers are updated, and the BSY bit is cleared to 0.
hour, and day-of-week registers after the relevant flag in RTCFLG is set to 1 and the BSY bit
is confirmed to be 0.
When INT in RTCCR1 is set to 1 and an interrupt is used, read from the second, minute, hour,
and day-of-week registers after the relevant flag in RTCFLG is set to 1.
no change in the read data, the read data is used.
Data Reading Procedure
Figure 11.4 Example: Reading of Inaccurate Time Data
Before update
After update
BSY bit = 0
BSY bit -> 1 (under data update)
BSY bit -> 0
(1) Day-of-week data register read
(2) Hour data register read
(3) Minute data register read
(4) Second data register read
RWKDR = H'03, RHDDR = H'13, RMINDR = H'47, RSECDR = H'00
RWKDR = H'03, RHDDR = H'13, RMINDR = H'46, RSECDR = H'59
H'00
H'03
H'13
H'46
Rev. 3.00 May 15, 2007 Page 197 of 518
Section 11 Realtime Clock (RTC)
REJ09B0152-0300