DF38602RFT10 Renesas Electronics America, DF38602RFT10 Datasheet - Page 130

• Manufacturer Part Number: DF38602RFT10
• Description: MCU 3V 16K 32-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H SLPr

Specifications of DF38602RFT10

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: I²C, IrDA, SCI, SSU
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F38602RFT10; HD64F38602RFT10

Section 5 Power-Down Modes
5.4
The module-standby function can be set to any peripheral module. In module standby mode, the
clock supply to modules stops to enter the power-down mode. Module standby mode enables each
on-chip peripheral module to enter the standby state by clearing a bit that corresponds to each
module in CKSTPR1 and CKSTPR2 to 0 and cancels the mode by setting the bit to 1. (See section
5.1.3, Clock Halt Registers 1 and 2 (CKSTPR1 and CKSTPR2).)
5.5
The on-chip oscillator can be used as the clock source for the watchdog timer (WDT), subclock
generation circuit (φ
When the on-chip oscillator is used as the clock source for the watchdog timer (WDT), it operates
in any modes, such as active, sleep, subactive, subsleep, watch, and standby modes.
When the on-chip oscillator is used as the clock source for the subclock generation circuit, it stops
in standby mode and operates in other modes.
When the on-chip oscillator is used only as the clock source for the system clock generation
circuit, it operates in active and sleep modes but halts the operation in subactive, subsleep, watch,
and standby modes.
When the on-chip oscillator is not used as the clock source for the watchdog timer (WDT),
subclock generation circuit, or system clock generation circuit, it halts the operation.
The on-chip oscillator operates at a reset and after a reset, because the watchdog timer (WDT)
selects the on-chip oscillator as the clock source for the initial value.
Rev. 3.00 May 15, 2007 Page 96 of 516
REJ09B0152-0300
Module Standby Function
On-Chip Oscillator and Operation Mode
W
= R
OSC
/32), and system clock generation circuit (φ
OSC
= R
OSC
).