MOD5272-100IR NetBurner Inc, MOD5272-100IR Datasheet - Page 439

PROCESSOR MODULE FLASH MOD5272

MOD5272-100IR

Manufacturer Part Number
MOD5272-100IR
Description
PROCESSOR MODULE FLASH MOD5272
Manufacturer
NetBurner Inc
Type
Controllers & Processorsr

Specifications of MOD5272-100IR

Module/board Type
Processor Module
Ethernet Connection Type
10/100 Ethernet Port RJ-45
Operating Voltage
3.3 V
Product
Modules
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
MOD5272
For Use With
528-1001 - KIT DEVELOP NETWORK FOR MOD5272
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
528-1008
USB Module Signals and PA[6:0]
19.10.4 Request to Send (URT0_RTS/PB3)
UART0 mode: Asserting URT0_RTS output is an automatic request to send output from the
UART0 module. URT0_RTS can also be configured to be asserted and negated as a
function of the RxFIFO level.
Port B mode: This pin can also be configured as the PB3 I/O.
19.10.5 Clock (URT0_CLK/PB4)
UART0 mode: URT0_CLK provides a clock input that can be a 1x or 16x baud rate clock.
Port B mode: This pin can also be configured as the PB4 I/O.
19.11 USB Module Signals and PA[6:0]
The USB module uses the signals in this section for data and clock signals. These signals
are multiplexed with the GPIO port A signals PA[6:0].
19.11.1 USB Transmit Serial Data Output (USB_TP/PA0)
USB mode: USB_TP is the non-inverted data transmit output.
Port A mode: This pin can also be configured as the PA0 I/O.
19.11.2 USB Receive Serial Data Input (USB_RP/PA1)
USB mode: USB_RP is the non-inverted receive data input.
Port A mode: This pin can also be configured as the PA1 I/O.
19.11.3 USB Receive Data Negative (USB_RN/PA2)
USB mode: USB_RN is the inverted receive data input.
Port A mode: This pin can also be configured as the PA2 I/O.
19.11.4 USB Transmit Data Negative (USB_TN/PA3)
USB mode: USB_TN is the inverted data transmit output.
Port A mode: This pin can also be configured as the PA3 I/O.
19.11.5 USB Suspend Driver (USB_SUSP/PA4)
USB mode: USB_SUSP is used to put the USB driver in suspend operation.
Port A mode: This pin can also be configured as the PA4 I/O.
MOTOROLA
Chapter 19. Signal Descriptions
19-25

Related parts for MOD5272-100IR