MOD5272-100IR NetBurner Inc, MOD5272-100IR Datasheet - Page 148

• Manufacturer Part Number: MOD5272-100IR
• Description: PROCESSOR MODULE FLASH MOD5272
• Manufacturer: NetBurner Inc
• Type: Controllers & Processorsr

Specifications of MOD5272-100IR

• Module/board Type: Processor Module
• Ethernet Connection Type: 10/100 Ethernet Port RJ-45
• Operating Voltage: 3.3 V
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MOD5272
• For Use With: 528-1001 - KIT DEVELOP NETWORK FOR MOD5272
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 528-1008

Background Debug Mode (BDM)
Command Sequence:
Operand Data
Result Data
5.5.3.3.5 Dump Memory Block (
DUMP
is executed to set up the starting address of the block and to retrieve the first result. If an
initial
The
the operand size (1, 2, or 4) and saved in a temporary register. Subsequent
use this address, perform the memory read, increment it by the current operand size, and
store the updated address in the temporary register.
5-26
WRITE (LONG)
WRITE (B/W)
DUMP
???
???
READ
is used with the
command retrieves subsequent operands. The initial address is incremented by
is not executed before the first
"NOT READY"
"NOT READY"
MS ADDR
MS ADDR
This two-operand instruction requires a longword absolute address
that specifies a location to which the data operand is to be written.
Byte data is sent as a 16-bit word, justified in the LSB; 16- and 32-bit
operands are sent as 16 and 32 bits, respectively
Command complete status is indicated by returning 0xFFFF (with S
cleared) when the register write is complete. A value of 0x0001 (with
S set) is returned if a bus error occurs.
READ
Figure 5-24.
command to access large blocks of memory. An initial
"NOT READY"
"NOT READY"
LS ADDR
LS ADDR
MCF5272 User’s Manual
WRITE
DUMP
DUMP
Command Sequence
)
"NOT READY"
"NOT READY"
"NOT READY"
MS DATA
LS DATA
DATA
, an illegal command response is returned.
LOCATION
LOCATION
MEMORY
MEMORY
WRITE
WRITE
DUMP
"NOT READY"
"NOT READY"
"CMD COMPLETE"
"CMD COMPLETE"
BERR
BERR
XXX
"NOT READY"
XXX
"NOT READY"
NEXT CMD
NEXT CMD
XXX
XXX
XXX
XXX
NEXT CMD
NEXT CMD
commands
MOTOROLA
READ