LPC1313FBD48,151 NXP Semiconductors, LPC1313FBD48,151 Datasheet - Page 156

• Manufacturer Part Number: LPC1313FBD48,151
• Description: IC MCU 32BIT 32KB FLASH 48LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC13xxr

Specifications of LPC1313FBD48,151

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 48-LQFP
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 72MHz
• Connectivity: I²C, Microwire, SPI, SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 42
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC13
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Interface Type: I2C, UART
• Maximum Clock Frequency: 72 MHz
• Number Of Timers: 2
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: OM11041
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Cpu Family: LPC1000
• Device Core: ARM Cortex-M3
• Device Core Size: 32b
• Frequency (max): 72MHz
• Total Internal Ram Size: 8KB
• # I/os (max): 42
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 2V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 48
• Package Type: LQFP
• Package: 48LQFP
• Family Name: LPC1000
• Maximum Speed: 72 MHz
• Number Of Programmable I/os: 42
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-4918 - KIT DEV FOR LPC1313622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4914; 935289651151

NXP Semiconductors
UM10375
User manual
10.4.2 USB human interface driver
The following steps show how to use the USB human interface driver. A complete
example is available in the LPC13xx code bundle.
5. Initialize the USB:
6. Initialize the mass storage state machine:
7. Add the USB interrupt handler to your project:
8. Call USB connect:
1. Map the pointer to the on chip driver table:
2. Enable 32-bit timer 1 (CT32B1) and IOCONFIG block:
3. Initialize USB clock and pins:
4. Set up device type and information:
5. Initialize the USB:
MscDevInfo.MSC_Write = MSC_MemoryWrite;
DeviceInfo.DevType = USB_DEVICE_CLASS_STORAGE;
DeviceInfo.DevDetailPtr = (uint32_t)&MscDevInfo;
(*rom)->pUSBD->init(&DeviceInfo);
(uint32_t *) BulkStage = 0x10000054;
*BulkStage = 0x0;
USB_IRQHandler(void)
{
}
(*rom)->pUSBD->connect(TRUE);
ROM ** rom = (ROM **)0x1fff1ff8;
LPC_SYSCON->SYSAHBCLKCTRL |= (EN_TIMER32_1 | EN_IOCON);
(*rom)->pUSBD->init_clk_pins();
USB_DEV_INFO DeviceInfo;
HID_DEVICE_INFO HidDevInfo;
HidDevInfo.idVendor = USB_VENDOR_ID;
HidDevInfo.idProduct = USB_PROD_ID;
HidDevInfo.bcdDevice = USB_DEVICE;
HidDevInfo.StrDescPtr = (uint32_t)&USB_StringDescriptor[0];
HidDevInfo.InReportCount = 1;
HidDevInfo.OutReportCount = 1;
HidDevInfo.SampleInterval = 0x20;
HidDevInfo.InReport = GetInReport;
HidDevInfo.OutReport = SetOutReport;
DeviceInfo.DevType = USB_DEVICE_CLASS_HUMAN_INTERFACE;
(*rom)->pUSBD->isr();
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 July 2010
Chapter 10: LPC13xx USB on-chip drivers
UM10375
© NXP B.V. 2010. All rights reserved.
158 of 333