OM13013,598 NXP Semiconductors, OM13013,598 Datasheet - Page 347

• Manufacturer Part Number: OM13013,598
• Description: BOARD DEMO IAR LPC1227 JLINKLITE
• Manufacturer: NXP Semiconductors
• Series: -r

Specifications of OM13013,598

• Design Resources: LPC122x-SK Brd Schematic
• Processor To Be Evaluated: LPC1227
• Processor Series: LPC122x
• Data Bus Width: 32 bit
• Interface Type: UART, SSP, SPI, I2C
• Cpu Core: ARM Cortex-M0
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3 V to 3.6 V
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-6885

NXP Semiconductors
Table 345. channel_cfg bit assignments
UM10441
User manual
Bit
27:26
29:28
31:30
Name
src_inc
dst_size
dst_inc
Description
Set the bits to control the source address increment. The address increment depends on the
source data width as follows:
Source data width = byte
00 = byte.
01 = half-word.
10 = word.
11 = no increment. Address remains set to the value that the src_data_end_ptr memory location
contains.
Source data width = half-word
00 = reserved.
01 = half-word.
10 = word.
11 = no increment. Address remains set to the value that the src_data_end_ptr memory location
contains.
Source data width = word
00 = reserved.
01 = reserved.
10 = word.
11 = no increment. Address remains set to the value that the src_data_end_ptr memory location
contains.
Destination data size. Must be set to the same value as source data size.
Destination address increment.
The address increment depends on the source data width as follows:
Source data width = byte
00 = byte.
01 = half-word.
10 = word.
11 = no increment. Address remains set to the value that the dst_data_end_ptr memory location
contains.
Source data width = half-word
00 = reserved.
01 = half-word.
10 = word.
11 = no increment. Address remains set to the value that the dst_data_end_ptr memory location
contains.
Source data width = word
00 = reserved.
01 = reserved.
10 = word.
11 = no increment. Address remains set to the value that the dst_data_end_ptr memory location
contains.
All information provided in this document is subject to legal disclaimers.
…continued
Rev. 1 — 15 February 2011
Chapter 21: LPC122x General purpose micro DMA controller
UM10441
© NXP B.V. 2011. All rights reserved.
347 of 442