UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 477

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Note Writing to the TT0CCR1 register is the trigger.
Remark
Table 9-4. Function of Capture/Compare Register in Each Mode and How to Write Compare Register
Interval timer
External event counter
External trigger pulse output
One-shot pulse output
PWM output
Free-running timer
Pulse width measurement
Triangular-wave PWM output
Encoder compare
(a) Function as compare register
(b) Function as capture register
The following table shows the functions of the capture/compare register in each mode, and how to write data to
the compare register.
The TT0CCR1 register can be rewritten even when the TT0CTL0.TT0CE bit = 1.
The set value of the TT0CCR1 register is transferred to the CCR1 buffer register. When the value of the
16-bit counter matches the value of the CCR1 buffer register, a compare match interrupt request signal
(INTTT0CC01) is generated. If TOT01 pin output is enabled at this time, the output of the TOT01 pin is
inverted.
The compare register is not cleared by setting the TT0CTL0.TT0CE bit to 0.
In the free-running timer mode (when the TT0CCR1 register is used as a capture register), the count value
of the 16-bit counter is stored in the TT0CCR1 register if the valid edge of the capture trigger input pin
(TIT01 pin) is detected. In the pulse width measurement mode, the count value of the 16-bit counter is
stored in the TT0CCR1 register and the 16-bit counter is cleared (0000H) if the valid edge of the capture
trigger input pin (TIT01 pin) is detected.
Even if the capture operation and reading the TT0CCR1 register conflict, the correct value of the
TT0CCR1 register can be read.
The capture register is cleared by setting the TT0CTL0.TT0CE bit to 0.
Operation Mode
For anytime write and batch write, see 9.6 (2) Anytime write and batch write.
CHAPTER 9 16-BIT TIMER/EVENT COUNTER T (TMT)
Compare register
Compare register
Compare register
Compare register
Compare register
Capture/compare register
Capture register
Compare register
Compare register
User’s Manual U19601EJ2V0UD
TT0CCR1 Register
Anytime write
Anytime write
Batch write
Anytime write
Batch write
Anytime write
None
Batch write
Anytime write
How to Write Compare Register
Note
Note
Note
475