UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 1756

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

A.4 Debugging Tools (Hardware)
A.4.1
compatible) is shown below. Even if optional products are not prepared, connection is possible.
1754
<1>
<2>
<3>
<4>
<5>
<9>
<10> Check pin adapter
<11> Space adapter
<12> YQ connector
<13> Mount adapter
<14> Target connector
The system configuration when connecting the QB-V850ESJX3E
Notes 1. Under development
Host machine
CD-ROM
USB interface cable
AC adapter
In-circuit emulator
(QB-V850ESJX3E
Exchange adapter
When using IECUBE QB-V850ESJX3E
2. Download the device file from the NEC Electronics website.
Device
http://www.necel.com/micro/en/ods/index.html/
<6> Check pin adapter (under development)
<11> Space adapter
<9> Exchange adapter
<10> Check pin adapter (S type only)
<13> Mount adapter
<14> Target connector
<15> Target system
Enables signal monitoring (S and T types)
Exchanges pins among different
microcontroller types
Each adapter can adjust height by 5.6 mm.
For device mounting
For mounting on target system
Enables signal monitoring
Figure A-2. System Configuration (When Using QB-V850ESJX3E
Note 1
<7> Extension probe
<8> Extension probe
Accessories
)
Required
Optional
Flexible type (S and T types)
Coaxial type (S and T types)
PC-9821 series, IBM-PC/AT compatibles
Debugger, USB driver, manuals
(ID850QB Disk, Accessory Disk
Cable to connect the host machine and the QB-V850ESJX3E.
100 to 240 V can be supported by replacing the AC plug.
The in-circuit emulator serves to debug hardware and software when developing application
systems using the V850ES/JH3-E or V850ES/JJ3-E. It supports the integrated debugger
ID850QB. This emulator should be used in combination with a power supply unit and emulation
probe. Use the USB interface cable to connect this emulator to the host machine.
Adapter to perform pin conversion.
Adapter used in waveform monitoring using the oscilloscope, etc.
Adapter to adjust the height.
Conversion adapter to connect target connector and exchange adapter
Adapter to mount the V850ES/JH3-E or V850ES/JJ3-E on a socket.
Connector to solder on the target system.
APPENDIX A DEVELOPMENT TOOLS
S-type socket configuration
<5> IECUBE
User’s Manual U19601EJ2V0UD
Note 1
System configuration
Note 2
)
T-type socket configuration
<4> Power supply
Note 1
<3> USB cable
Feature
<12> YQ connector
<11> Space adapter
<9> Exchange adapter
to the host machine (PC-9821 series, PC/AT
microcontroller types
Exchanges pins among different
Connector for connecting to emulator
Each adapter can adjust height by
3.2 mm.
<14> Target connector
<15> Target system
<2> CD-ROM
<13> Mount adapter
For mounting on target system
For device mounting
Simple flash
programmer
Note 1
)
<1>