BMSKTOPASA900(DCE) Toshiba, BMSKTOPASA900(DCE) Datasheet - Page 820

• Manufacturer Part Number: BMSKTOPASA900(DCE)
• Description: KIT STARTER TMPA900 USB JTAG
• Manufacturer: Toshiba
• Series: TOPASr
• Type: MCUr

Specifications of BMSKTOPASA900(DCE)

• Contents: Evaluation Board, Cable(s), Software and Documentation
• For Use With/related Products: TMPA900CMXBG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.24.2.3 AD Conversion Start
(ADMOD0<ADBFN>) that shows the state for AD being converted is set to 1.
(ADMOD2<ADBFHP>) that shows the state for AD being converted is set to 1.
ADMOD0<ADBFN> is kept to 1.
to 0 only when read.
Top-priority AD conversion can be carried out first.
conversion's startup, normal AD conversion being converted currently is cancelled
immediately. Then, top-priority AD conversion is started, starting the AD conversion
(channel fix single conversion) for the channel specified by ADMOD2<HPADCH[2:0]>.
When this result is stored into ADREGSPH/L, normal AD conversion is restarted from the
cancelled channel.
conversion being converted currently is end (AD conversion End flag: ADMOD<ADBFHP>).
Then top-priority conversion AD conversion can be started.
When
When top-priority AD conversion is started, the AD conversion BUSY flag
In addition, when top-priority conversion is started during normal AD conversion,
<EOCFHP> and <EOCFN> are set to 1 after conversion is completed. This flag is cleared
Two type AD conversion can be used. During Normal AD conversion is executing,
When ADMOD2<HPADCE> is set to 1 during normal AD conversion, top-priority AD
But during top-priority AD conversion, can’t set top-conversion AD conversion again.
If top-priority AD conversion need to be set again, have to check that top-priority AD
conversion.
AD conversion can be started up by software by setting ADMOD2<HPADCE> to 1.
operation modes specified by ADMOD0<REPEAT, SCAN>. The operation mode for
top-priority AD conversion is only single conversion by channel fix mode.
The AD conversion has the two types of normal AD conversion and top-priority AD
Normal AD conversion can be started up by setting ADMOD0<ADS> to 1. Top-priority
For normal AD conversion, one operation mode is selected from the four types of
normal
AD
conversion
TENTATIVE
TMPA900CM- 819
is
started,
the
AD
conversion
TMPA900CM
BUSY
2009-10-14
flag