HD6417320 RENESAS [Renesas Technology Corp], HD6417320 Datasheet - Page 935

• Manufacturer Part Number: HD6417320
• Description: Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

26.3.4
LDSMR selects whether or not to enable the hardware rotation function that is used to rotate the
LCD panel, and sets the burst length for the VRAM (synchronous DRAM in area 3) used for
display.
Bit
15, 14
13
12 to 10 
Bit Name Initial Value

ROT
LCDC Scan Mode Register (LDSMR)
All 0
0
All 0
R/W
R
R/W
R
Description
Reserved
These bits are always read as 0. The write value
should always be 0.
Rotation Module Select
Selects whether or not to rotate the display by
hardware. Note that the following restrictions are
applied to rotation.
•
•
•
0: Not rotated
1: Rotated 90 degrees rightwards (left side of
Reserved
These bits are always read as 0. The write value
should always be 0.
image is displayed on the upper side of the LCD
module)
An STN or TFT panel must be used. A DSTN
panel is not allowed.
The maximum horizontal (internal scan direction of
the LCD panel) width of the LCD panel is 320.
Set a binary exponential that exceeds the display
size in LDLAOR. (For example, 256 must be
selected when a 320 × 240 panel is rotated to be
used as a 240 × 320 panel and the horizontal
width of the image is 240 bytes.)
Rev. 3.00 Jan. 18, 2008 Page 873 of 1458
Section 26
LCD Controller (LCDC)
REJ09B0033-0300