HD6417320 RENESAS [Renesas Technology Corp], HD6417320 Datasheet - Page 1472

• Manufacturer Part Number: HD6417320
• Description: Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Rev. 3.00 Jan. 18, 2008 Page 1410 of 1458
REJ09B0033-0300
Item
13.3.5 Standby Control Register 5
(STBCR5)
13.5 Software Standby Mode
13.5.2 Canceling Software
Standby Mode
Page Revision (See Manual for Details)
486
489,
490
Amended and notes added
Changed
Software standby mode is canceled by interrupts (NMI,
IRQ (edge detection), RTC, TMU, and PINT) or a reset.
(1) Canceling with Interrupt
The on-chip WDT can be used for hot starts. When the
chip detects an NMI, IRQ (edge detection)*
TMU*
Notes: 1. Only when the RTC is used, software
Bit
7
6
2
1
Bit Name

MSTP56
MSTP52
, or PINT*
standby mode can be canceled by IRQ (edge
detection), RTC, TMU, or PINT interrupt.
Description
Reserved
This bit is always read as 0. The write value
Module Stop Bit 56
When the MSTP56 bit is set to 1, the supply of
the clock to the SDHI is halted.
0: Clock supply to SDHI halted
1: SDHI operates
Note: On the models not having the SDHI, this
Module Stop Bit 52
When the MSTP52 bit is set to 1, the supply of
the clock to the SSL is halted.
0: SSL operates
1: Clock supply to SSL halted
Note: On the models not having the SSL, this bit
should always be 0.
1
interrupt,…
bit is reserved and is always read as 0.
The write value should always be 0.
is reserved. The write value should always
be 1.
1
, RTC*
1
,