sc9s12hy64j0vllr Freescale Semiconductor, Inc, sc9s12hy64j0vllr Datasheet - Page 595

• Manufacturer Part Number: sc9s12hy64j0vllr
• Description: S12 Microcontrollers Mcu 16-bit Hcs12 Cisc 32kb Flash 5v Tray
• Manufacturer: Freescale Semiconductor, Inc

If a Flash block is read during execution of an algorithm (CCIF = 0) on that same block, the read operation
will return invalid data. If the SFDIF or DFDIF flags were not previously set when the invalid read
operation occurred, both the SFDIF and DFDIF flags will be set.
If the ACCERR or FPVIOL bits are set in the FSTAT register, the user must clear these bits before starting
any command write sequence (see
16.4.5.1
The Erase Verify All Blocks command will verify that all P-Flash and D-Flash blocks have been erased.
Upon clearing CCIF to launch the Erase Verify All Blocks command, the Memory Controller will verify
that the entire Flash memory space is erased. The CCIF flag will set after the Erase Verify All Blocks
operation has completed.
16.4.5.2
The Erase Verify Block command allows the user to verify that an entire P-Flash or D-Flash block has been
erased. The FCCOB upper global address bits determine which block must be verified.
Freescale Semiconductor
1
As found in the memory map for FTMRC64K1.
Register
FSTAT
Erase Verify All Blocks Command
Erase Verify Block Command
A Flash word or phrase must be in the erased state before being
programmed. Cumulative programming of bits within a Flash word or
phrase is not allowed.
Table 16-31. Erase Verify All Blocks Command FCCOB Requirements
CCOBIX[2:0]
Table 16-33. Erase Verify Block Command FCCOB Requirements
CCOBIX[2:0]
MGSTAT1
MGSTAT0
Table 16-32. Erase Verify All Blocks Command Error Handling
ACCERR
Error Bit
FPVIOL
000
000
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
Set if CCOBIX[2:0] != 000 at command launch
None
Set if any errors have been encountered during the read
Set if any non-correctable errors have been encountered during the read
Section
16.3.2.7).
0x01
0x02
CAUTION
FCCOB Parameters
FCCOB Parameters
Global address [17:16] of the
Error Condition
Flash block to be verified
Not required
48 KByte Flash Module (S12FTMRC48K1V1)
1
.
1
595