MMC2114CFCAG33 Freescale Semiconductor, MMC2114CFCAG33 Datasheet - Page 582

• Manufacturer Part Number: MMC2114CFCAG33
• Description: IC MCU 32BIT 33MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2114CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2114
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 104
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Controller Family/series: MCORE
• No. Of I/o's: 104
• Ram Memory Size: 32KB
• Cpu Speed: 33MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

JTAG Test Access Port and OnCE
22.13.4 Debug Mode Select (TMS)
22.13.5 Test Reset (TRST)
22.13.6 Debug Event (DE)
22.14 Functional Description
Advance Information
582
The TMS input is used to cycle through states in the OnCE debug
controller. Toggling the TMS pin while clocking with TCLK controls the
transitions through the TAP state controller.
The TRST input is used to reset the OnCE controller externally by
placing the OnCE control logic in a test logic reset state. OnCE operation
is disabled in the reset controller and reserved states.
The DE pin is a bidirectional open drain pin. As an input, DE provides a
fast means of entering debug mode from an external command
controller. As an output, this pin provides a fast means of acknowledging
debug mode entry to an external command controller.
The assertion of this pin by a command controller causes the CPU to
finish the current instruction being executed, save the instruction
pipeline information, enter debug mode, and wait for commands to be
entered from the TDI line. If DE was used to enter debug mode, then DE
must be negated after the OnCE responds with an acknowledgment and
before sending the first OnCE command.
The assertion of this pin by the CPU acknowledges that it has entered
debug mode and is waiting for commands to be entered from the TDI
line.
The on-chip emulation (OnCE) circuitry provides a simple, inexpensive
debugging interface that allows external access to the processor’s
internal registers and to memory/peripherals. OnCE capabilities are
controlled through a serial interface, mapped onto a JTAG test access
port (TAP) protocol.
circuitry.
Freescale Semiconductor, Inc.
For More Information On This Product,
JTAG Test Access Port and OnCE
Go to: www.freescale.com
Figure 22-6
MMC2114 • MMC2113 • MMC2112 — Rev. 1.0
shows the components of the OnCE
MOTOROLA