MMC2114CFCAG33 Freescale Semiconductor, MMC2114CFCAG33 Datasheet - Page 236

• Manufacturer Part Number: MMC2114CFCAG33
• Description: IC MCU 32BIT 33MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2114CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2114
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 104
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Controller Family/series: MCORE
• No. Of I/o's: 104
• Ram Memory Size: 32KB
• Cpu Speed: 33MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Second Generation FLASH for M•CORE (SGFM)
10.8.3.4 FLASH User Mode Illegal Operations
Advance Information
236
The ACCERR flag will be set during a command write sequence if any
of the illegal operations below are performed. Such operations will cause
the command sequence to immediately abort.
10. Writing to any SGFM register other than SGFMUSTAT (to clear
11. Entering stop mode while a program or erase command is in
12. Aborting a command sequence by writing a 0 to CBEIF after the
1. Writing to the SGFM array before initializing SGFMCLKD.
2. Writing to the SGFM array while in emulation mode.
3. Writing a byte or a halfword to the SGFM array. Only 32-bit word
4. Writing to the SGFM array at a location that does not match
5. Writing to the SGFM array while CBEIF is not set.
6. Writing a second word to the SGFM array before executing a
7. Writing an invalid user command to the SGFMCMD.
8. Writing to any SGFM other than SGFMCMD after writing a word to
9. Writing a second command to SGFMCMD before executing the
Freescale Semiconductor, Inc.
Second Generation FLASH for M•CORE (SGFM)
For More Information On This Product,
programming is allowed.
BKSEL[1:0]. Depending on the size of the FLASH array. MLB
address bits [18:17] must match BKSEL[1:0].
command on the previously written word.
the SGFM array.
previously written command.
CBEIF) after writing to the command register.
progress.
word write to the SGFM array or after writing a command to
SGFMCMD and before launching it.
Go to: www.freescale.com
MMC2114 • MMC2113 • MMC2112 — Rev. 1.0
MOTOROLA