TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 78

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

standby mode
Not clearing
8 Exceptions
(clearing standby mode)
Settings for detection
CG detects interrupt
Settings for sending
Interrupt generation
8.5.2
interrupt signal
Processing
8.5.2.1
The following shows how an interrupt is handled.
Interrupt Handling
Flowchart
Clearing standby
indicates hardware handling.
mode
Set the relevant NVIC registers for detecting interrupts.
Set the clock generator as well if each interrupt source is used
to clear a standby mode.
○ Common setting
NVIC registers
○ Setting to clear standby mode
Clock generator
Execute an appropriate setting to send the interrupt signal
depending on the interrupt type.
○ Setting for interrupt from external pin
Port
○ Setting for interrupt from peripheral function
Peripheral function (See the chapter of each peripheral
function for details.)
An interrupt request is generated.
Interrupt lines used for clearing a standby mode are
connected to the CPU via the clock generator.
Under development
Page66
Details
indicates software handling.
Preparation
Generator
Detection
by Clock
TMPM330
8.5.2.2
8.5.2.3
See