TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 130

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

9 Input/Output Ports
9.2.10
reset signal, if PH0 is “1”, the device enters single mode and boots from the on-chip flash memory. If PH0
is “0”, the device enters single boot mode and boots from the internal boot program. For details of single
boot mode, refer to “Chapter 17 Flash Memory Operation”.
specified in units of bits. Besides the general-purpose port function, the port H performs the functions of
the 16-bit timer input and the operation mode setting.
is enabled for PH0 and disabled for PH1 through PH7.
The port H is a general-purpose, 8-bit input/output port. For this port, inputs and outputs can be
While a reset signal is in “0”state, the PH0 input and pull-up are enabled. At the rising edge of the
Reset initializes all bits of the port H as general-purpose ports with input and output disabled. Pull-up
Port H (PH0~PH7)
Under development
Page118
TMPM330